Solution to customized Fiberglass/FRP products
ISO9001:2015
Olimy Fiberglass

RTM Fiberglass

 RTM is resin transfer molding. Two smooth surfaces is the major advantage of this process. Comparing to hand lay up, artificial factor is not so important. The production cycle time is also much shorter. Through this process, we have made parts for auto components, basins and toilets.

FRP Resin Transfer Molding(RTM) has the following main features:

(1)  FRP RTM technology consists of two steps: processing reinforced material preform  and curing resin injection. Two steps can be performed separately, with high flexibility and modularity, can realize the "material design".
 
(2)  FRP RTM technology is mold closing forming ,through enhancing the infiltration of raw material and resin to make the resin to flow fast in sealed cavity, not like the manual infiltration of hand lay-up process and injection process, or prepreg technology, or the mechanized infiltration of SMC whose cost is very expensive.RTM  is a low cost, high quality semi-mechanized fiber / resin infiltration process.

(3) FRP RTM technology adopts performing technology of the reinforced material Preforming Technology with similar shapes, fiber / resin infiltration can be cured by complete, so it can be used for low viscosity fast curing resin, and can be used for heating and further improve the production efficiency and product quality.

(4) reinforced preform material body can be chopped strand mat, continuous fiber, fiber cloth, no fold fabric, knitted fabric and three-dimensional 3D braided fabrics, and can choose according to the performance requirements, to enhance local contrast enhancement, hybrid and the use of embedded and sandwich structure, can make full use of design the properties of the composite materials.

(5) FRP RTM process of closed die resin injection method can greatly reduce the toxic harmful components of resin to human body and environment, meet the advanced industrial countries to styrene volatilization of harmful gas concentration is more and more strict restriction.

(6) FRP RTM by low-pressure injection technique ( - injection pressure <0.4MPa), is conducive to the overall structure of preparing large size, complex shape, smooth on both sides.

(7) the mold can select different materials according to the scale of production requirements, in order to minimize the costs.

    TOTAL:1PAGE4RECORDS

Why Choose Us

  • One-Stop Service£º
    Besides qualified products, we also offer customer specialized logistic service. Based on good knowledge of exporting and importing Custom declaration, with help of long term cooperated forwarders, we are able to offer customer one stop service from the order to the products transported to the customer hand.
  • Quality Stability£º
    More than 90 percent workers have been working in our factory for over 7 years. Low turnover rate makes us offer customer more stable quality level, especially for hand lay up process.
  • Experience£º
    More than 10 years¡¯ experience in producing and exporting fiberglass products, both hand lay up and SMC process, make us a standard procedure for quality control and problem prevention.
    More than 85% of our products are exported to North America and Europe, which makes us get a good knowledge on such markets. The request from those markets is also as our standard to be applied on the whole production.
  • OLIMY in the News

  • Technical Problem 1 from Fiberglass Compression Molding:cavities unfully filled
    Technical Problem 1 from Fiberglass Compression Molding:cavities unfully filled Condition 1:Not fully filled at the edge of Fiberglass Compression Mold 1.Reason:Insufficient feeding Fiberglass SMC material---Solution:Increase the quantity of feeding...read more
  • Contact Us

    Tel:+86 21 52686627

    Fax:+86 21 52686625

    Mobile:+86 13916579610

    Email:sales@olimy.com

    URL:www.olimyfiberglass.com

    Address:Room 810 Building B Lane 2888 South Qilianshan Road Putuo District Shanghai China